.. smartphone Vehicle Requirements vary by region, we’ll show you what is needed Additional Information: If you have previous employment experience in transportation (such as a delivery driver, driver, professional driver, driving job, truck driver, heavy and tractor-trailer driver, cdl truck driver .. read more
EOE Statement
We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law.
Description
POSITION DESCRIPTION SUMMARY
Job Title: Fabricator I (Cast Polymers)
Department: Solid Surface Fabrication
Reports to: Solid Surface Division Manager
FLSA Status: Full Time - Non-Exempt
Prepared/Updated: July 2024
SUMMARY
Responsible for operating cast polymer saws and routers to perform standard cast polymer fabrication work; produces cast polymer trim parts; inspects fabricated pieces to ensure they conform to quality standards.
Essential Functions and Key Responsibilities :
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
High School Diploma or its equivalent
LANGUAGE SKILLS
Ability to read, analyze, and interpret manufacturing instructions and customer order sheets
REASONING ABILITY
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and outside weather conditions. The employee is occasionally exposed to toxic or caustic chemicals. The noise level in the work environment is usually moderate.
While performing the duties of this job, the employee is frequently required to stand, walk, sit, and talk or hear. The employee is occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 150 pounds with assistance. Specific vision abilities required by this job include close vision, and distance vision.
This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. The above statements are intended to describe the general nature and level of work performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required.
Tower Industries is an Equal Opportunity Employer (M/F/D/V). We believe that every applicant interested in employment with this company should be treated fairly, equitably, and with dignity without regard for race, creed, color, religion, national origin, age, sex, disability or military or veteran status. We endeavor to ensure that this same philosophy permeates the employment relationship at all levels within the company.
Position Requirements
General Requirements
1. Uses appropriate personnel protective equipment and follows established safe working practices
2. Follows safety procedures as required and communicates safety concerns and issues to management
3. Follows housekeeping guidelines regarding personal work area and equipment for which he/she is responsible
4. Conducts themselves in a professional manner; communicates respectfully with fellow employees, customers, and suppliers
5. Commitment to Core Values - Kind, Take Initiative, Get It Done, Make It Right, Humble, Enthusiastic
About the Organization
Tower Industries is the premier provider of premium surfacing solutions for a wide variety of residential, commercial, and institutional applications. We have worked tirelessly to build a business driven by hard work, top-quality surfacing products, innovative solutions, and continuous improvement. All Tower Industries products are custom-fabricated in our 60,000 square foot manufacturing facility located in Massillon, Ohio.
We work regularly with architects, designers, contractors, and builders, offering open lines of communication, creative ideas, and responsive customer service. Our unrivaled flexibility, in both our business model and the design of our products, allows you to focus on other pressing business priorities.
Our Mission
Tower Industries is committed to serving a wide range of national clients, including commercial general contractors, millwork/casework suppliers, dealers, builders, specifiers, architects, and designers. We also regionally and locally serve residential customers, commercial general contractors, millwork/casework suppliers, dealers, builders, specifiers, architects, and designers. We are dedicated to exceeding customer expectations and delivering absolute, on-time performance.
We are a drug-free workplace.
This position is currently accepting applications.
We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law.
Description
POSITION DESCRIPTION SUMMARY
Job Title: Fabricator I (Cast Polymers)
Department: Solid Surface Fabrication
Reports to: Solid Surface Division Manager
FLSA Status: Full Time - Non-Exempt
Prepared/Updated: July 2024
SUMMARY
Responsible for operating cast polymer saws and routers to perform standard cast polymer fabrication work; produces cast polymer trim parts; inspects fabricated pieces to ensure they conform to quality standards.
Essential Functions and Key Responsibilities :
- Operates cast polymer saws and routers
- Performs daily operator maintenance on assigned equipment and maintains records of that maintenance
- Measures and inspects parts during processing and finishing to ensure they meet Order Specification within accepted tolerances
- ified by Division Manager or Plant Manager)
- Performs standard fabrication work including but not limited to: finished part assembly, trim preparation and assembly, edge preparation, mounting of sink bowls, location of cutouts, and shower base assembly
- Prepares fabricated parts for shipment and/or installation including final inspection; applies proper labeling to all produced parts
- Train, Certify, and Operate forklift/tow motor with onsite trainer (must be cert General Requirements
QUALIFICATIONS
To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
EDUCATION and/or EXPERIENCE
High School Diploma or its equivalent
LANGUAGE SKILLS
Ability to read, analyze, and interpret manufacturing instructions and customer order sheets
REASONING ABILITY
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form
PHYSICAL DEMANDS
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
WORK ENVIRONMENT
The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
While performing the duties of this job, the employee is occasionally exposed to moving mechanical parts, fumes or airborne particles, and outside weather conditions. The employee is occasionally exposed to toxic or caustic chemicals. The noise level in the work environment is usually moderate.
While performing the duties of this job, the employee is frequently required to stand, walk, sit, and talk or hear. The employee is occasionally required to reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must occasionally lift and/or move up to 150 pounds with assistance. Specific vision abilities required by this job include close vision, and distance vision.
This document does not represent a contract of employment, and the Company reserves the right to change this job description and/or assign tasks for the employee to perform, as the Company may deem appropriate. The above statements are intended to describe the general nature and level of work performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and skills required.
Tower Industries is an Equal Opportunity Employer (M/F/D/V). We believe that every applicant interested in employment with this company should be treated fairly, equitably, and with dignity without regard for race, creed, color, religion, national origin, age, sex, disability or military or veteran status. We endeavor to ensure that this same philosophy permeates the employment relationship at all levels within the company.
Position Requirements
General Requirements
1. Uses appropriate personnel protective equipment and follows established safe working practices
2. Follows safety procedures as required and communicates safety concerns and issues to management
3. Follows housekeeping guidelines regarding personal work area and equipment for which he/she is responsible
4. Conducts themselves in a professional manner; communicates respectfully with fellow employees, customers, and suppliers
5. Commitment to Core Values - Kind, Take Initiative, Get It Done, Make It Right, Humble, Enthusiastic
About the Organization
Tower Industries is the premier provider of premium surfacing solutions for a wide variety of residential, commercial, and institutional applications. We have worked tirelessly to build a business driven by hard work, top-quality surfacing products, innovative solutions, and continuous improvement. All Tower Industries products are custom-fabricated in our 60,000 square foot manufacturing facility located in Massillon, Ohio.
We work regularly with architects, designers, contractors, and builders, offering open lines of communication, creative ideas, and responsive customer service. Our unrivaled flexibility, in both our business model and the design of our products, allows you to focus on other pressing business priorities.
Our Mission
Tower Industries is committed to serving a wide range of national clients, including commercial general contractors, millwork/casework suppliers, dealers, builders, specifiers, architects, and designers. We also regionally and locally serve residential customers, commercial general contractors, millwork/casework suppliers, dealers, builders, specifiers, architects, and designers. We are dedicated to exceeding customer expectations and delivering absolute, on-time performance.
We are a drug-free workplace.
This position is currently accepting applications.